Stairs/src/main.cpp

/*
 * Stairs lighting
 * Copyright 2017 (c) Mark van Renswoude
*/
#include <stdint.h>
#include <Stream.h>
#include <ESP8266WiFi.h>
#include <WiFiUdp.h>

#include "config.h"
#include "protocol.h"
#include "components\PCA9685.h"
//#include "modes\adc.h"
#include "modes\alternate.h"
#include "modes\custom.h"
#include "modes\slide.h"
#include "modes\static.h"
#include "stairs.h"


PCA9685* pwmDriver;
Stairs* stairs;
WiFiUDP udpServer;
uint8_t currentModeIdentifier;
IMode* currentMode;


// Forward declarations
void checkRequest();
void handleRequest(uint8_t* packet);
IMode* createMode(uint8_t identifier);
void setCurrentMode(IMode *mode, uint8_t identifier);
void handleCurrentMode();


void setup()
{
  pwmDriver = new PCA9685();
  pwmDriver->setAddress(PWMDriverAddress, PinSDA, PinSCL);
  pwmDriver->setPWMFrequency(PWMDriverPWMFrequency);

  stairs = new Stairs();
  stairs->init(pwmDriver);

  WiFi.hostname(WiFiHostname);
  WiFi.begin(WiFiSSID, WiFiPassword);


  // Run a little startup test sequence
  stairs->setAll(IStairs::Off);
  stairs->set(0, IStairs::On);
  delay(300);

  for (int step = 1; step < StepCount; step++)
  {
    stairs->set(step - 1, IStairs::Off);
    stairs->set(step, IStairs::On);
    delay(300);
  }

  stairs->set(StepCount - 1, IStairs::Off);


  // Pulsate the bottom step while WiFi is connecting
  uint16_t brightness = 0;
  uint16_t speed = 16;

  while (WiFi.status() != WL_CONNECTED)
  {
    brightness += speed;
    if (brightness <= 0 || brightness >= 1024)
      speed = -speed;

    stairs->set(0, brightness);
    delay(16);
  }

  setCurrentMode(new StaticMode(), Mode::Static);


  // Start the UDP server
  udpServer.begin(UDPPort);
}


uint32_t currentTime;

// Note: the packet size must at least be able to accomodate the
// command with the largest parameter list, there is no overflow
// checking in the mode classes!
//
// At the time of writing, Get/SetRange is the largest:
//    Set Range (1) + UseScaling (1) + StepCount * 2x Word (4)
//    = 66 for the maximum of 16 steps
uint8_t packet[100];
uint8_t* packetRef;

void loop()
{
  currentTime = millis();

  checkRequest();
  handleCurrentMode();
}


void checkRequest()
{
  int packetSize = udpServer.parsePacket();
  if (packetSize)
  {
    memset(packet, 0, sizeof(packet));
    int length = udpServer.read(packet, 50);
    if (length && packet[0])
    {
      packetRef = packet;
      handleRequest(packetRef);
    }
  }
}


void handleRequest(uint8_t* packet)
{
  // Every request will result in a reply, either containing the
  // requested data or a copy of the input parameters for verification.
  //
  // Apparantly this also makes the ESP8266 more stable, as reports
  // have been made that UDP communication can stall if no replies are sent.
  udpServer.beginPacket(udpServer.remoteIP(), udpServer.remotePort());
  udpServer.write(Command::Reply);

  switch (*packet)
  {
    case Command::Ping:
      udpServer.write(Command::Ping);
      udpServer.write(StepCount);
      break;

    case Command::GetMode:
      udpServer.write(Command::GetMode);
      udpServer.write(currentModeIdentifier);
      currentMode->write(&udpServer);
      break;

    case Command::SetMode:
    {
      packet++;
      uint8_t newIdentifier = *packet;
      packet++;

      IMode* newMode = createMode(newIdentifier);

      if (newMode != NULL)
      {
        newMode->read(packet);

        udpServer.write(Command::SetMode);
        udpServer.write(newIdentifier);
        newMode->write(&udpServer);

        setCurrentMode(newMode, newIdentifier);
      }
      else
      {
        udpServer.write(Command::Error);
        udpServer.write(Command::SetMode);
        udpServer.write(newIdentifier);
      }

      break;
    }

    default:
      udpServer.write(Command::Error);
      udpServer.write(*packet);
      break;
  }

  udpServer.endPacket();
}


IMode* createMode(uint8_t identifier)
{
  if (identifier == currentModeIdentifier)
    return currentMode;

  switch (identifier)
  {
    case Mode::Static: return new StaticMode();
    case Mode::Custom: return new CustomMode();
    case Mode::Alternate: return new AlternateMode();
    //case Mode::Slide: return new SlideMode();
    //case Mode::ADC: return new ADCInputMode();
  }

  return NULL;
}


void setCurrentMode(IMode* mode, uint8_t identifier)
{
  currentModeIdentifier = identifier;
  currentMode = mode;
  currentMode->init(stairs, currentTime);
}


void handleCurrentMode()
{
  currentMode->tick(stairs, currentTime);
}