Implemented Arduino firmware

Implemented serial connection in Windows application

Arduino/MassiveKnob/MassiveKnob.ino

@@ -0,0 +1,230 @@
+/*
+ * 
+ * Configuration
+ *   Modify these settings according to your hardware design
+ * 
+ */
+// Set this to the number of potentiometers you have connected
+const byte KnobCount = 1;
+
+// For each potentiometer, specify the port
+const byte KnobPin[KnobCount] = {
+//  A0,
+  A1
+};
+
+// Minimum time between reporting changing values, reduces serial traffic
+const unsigned long MinimumInterval = 50;
+
+// Alpha value of the Exponential Moving Average (EMA) to reduce noise
+const float EMAAlpha = 0.6;
+
+// How many measurements to take at boot time to seed the EMA
+const byte EMASeedCount = 5;
+
+
+
+
+/*
+ * 
+ * Le code
+ *   Here be dragons.
+ * 
+ */
+bool active = false;
+enum OutputMode {
+  Binary,     // Communication with the desktop application
+  PlainText,  // Plain text, useful for the Arduino Serial Monitor
+  Plotter     // Graph values, for the Arduino Serial Plotter
+};
+OutputMode outputMode = Binary;
+
+byte volume[KnobCount];
+unsigned long lastChange[KnobCount];
+int analogReadValue[KnobCount];
+float emaValue[KnobCount];
+unsigned long currentTime;
+unsigned long lastPlot;
+
+void setup() 
+{
+  Serial.begin(115200);
+
+  // Wait for the Serial port hardware to initialise
+  while (!Serial) {}  
+
+
+  // Seed the moving average
+  for (byte knobIndex = 0; knobIndex < KnobCount; knobIndex++)
+    emaValue[knobIndex] = analogRead(KnobPin[knobIndex]);
+
+  for (byte seed = 1; seed < EMASeedCount - 1; seed++)
+    for (byte knobIndex = 0; knobIndex < KnobCount; knobIndex++)
+      getVolume(knobIndex);
+
+
+  // Read the initial values
+  currentTime = millis();  
+  for (byte knobIndex = 0; knobIndex < KnobCount; knobIndex++)
+  {
+    volume[knobIndex] = getVolume(knobIndex);
+    lastChange[knobIndex] = currentTime;
+  }
+}
+
+
+void loop() 
+{
+  if (Serial.available())
+    processMessage(Serial.read());
+
+  // Not that due to ADC checking and Serial communication, currentTime will not be
+  // accurate throughout the loop. But since we don't need exact timing for the interval this
+  // is acceptable and saves a few calls to millis.
+  currentTime = millis();
+
+  // Check volume knobs  
+  byte newVolume;
+  for (byte knobIndex = 0; knobIndex < KnobCount; knobIndex++)
+  {
+    newVolume = getVolume(knobIndex);
+
+    if (newVolume != volume[knobIndex] && (currentTime - lastChange[knobIndex] >= MinimumInterval))
+    {
+      if (active)
+        // Send out new value
+        outputVolume(knobIndex, newVolume);
+
+      volume[knobIndex] = newVolume;
+      lastChange[knobIndex] = currentTime;
+    }
+  }
+
+  if (outputMode == Plotter && (currentTime - lastPlot) >= 50)
+  {
+    outputPlotter();
+    lastPlot = currentTime;
+  }
+}
+
+
+void processMessage(byte message)
+{
+  switch (message)
+  {
+    case 'H':   // Handshake
+      processHandshakeMessage();
+      break;
+
+    case 'Q':   // Quit
+      processQuitMessage();
+      break;
+  }
+}
+
+
+void processHandshakeMessage()
+{
+  byte buffer[2];
+  if (Serial.readBytes(buffer, 3) < 3)
+    return;
+  
+  if (buffer[0] != 'M' || buffer[1] != 'K')
+    return;
+
+  switch (buffer[2])
+  {
+    case 'B':
+      outputMode = Binary;
+      break;
+
+    case 'P':
+      outputMode = PlainText;
+      break;
+
+    case 'G':
+      outputMode = Plotter;
+      break;
+
+    default:
+      return;
+  }
+
+
+  switch (outputMode)
+  {
+    case Binary:
+      Serial.write('H');
+      Serial.write(KnobCount);
+      break;
+
+    case PlainText:
+      Serial.print("Hello! I have ");
+      Serial.print(KnobCount);
+      Serial.println(" knobs.");
+      break;
+  }
+
+  active = true;
+}
+
+
+void processQuitMessage()
+{
+  switch (outputMode)
+  {
+    case Binary:
+    case PlainText:
+      Serial.write('Q');
+      break;
+  }
+  
+  active = false;
+}
+
+
+byte getVolume(byte knobIndex)
+{
+  analogReadValue[knobIndex] = analogRead(KnobPin[knobIndex]);
+  emaValue[knobIndex] = (EMAAlpha * analogReadValue[knobIndex]) + ((1 - EMAAlpha) * emaValue[knobIndex]);
+  
+  return map(emaValue[knobIndex], 0, 1023, 0, 100);
+}
+
+
+void outputVolume(byte knobIndex, byte newVolume)
+{
+  switch (outputMode)
+  {
+    case Binary:
+      Serial.write('V');
+      Serial.write(knobIndex);
+      Serial.write(newVolume);    
+      break;
+
+    case PlainText:
+      Serial.print("Volume #");
+      Serial.print(knobIndex);
+      Serial.print(" = ");
+      Serial.println(newVolume);
+      break;
+  }
+}
+
+
+void outputPlotter()
+{
+  for (byte i = 0; i < KnobCount; i++)
+  {
+    if (i > 0)
+      Serial.print('\t');
+
+    Serial.print(analogReadValue[i]);
+    Serial.print('\t');
+    Serial.print(emaValue[i]);
+    Serial.print('\t');
+    Serial.print(volume[i]);
+  }
+
+  Serial.println();
+}

README.md

@@ -6,8 +6,8 @@ Control audio devices using physical knobs.
 Inspired by [an article on Prusa's blog](https://blog.prusaprinters.org/3d-print-an-oversized-media-control-volume-knob-arduino-basics_30184/), this project has a slightly different set of goals:
 
 **Must have**
-1. Control multiple audio devices, one set of physical controls per device
+1. ✔ Control multiple audio devices, one set of physical controls per device
-2. Volume is set to an absolute value (potentiometer instead of a rotary encoder)
+2. ✔ Volume is set to an absolute value (potentiometer instead of a rotary encoder)
 
 Because of the second requirement, a simple media keys HID device does not suffice and extra software is required on the desktop.
 
@@ -16,6 +16,8 @@ Because of the second requirement, a simple media keys HID device does not suffi
 a. by changing the Windows default output device
 b. by running a VoiceMeeter macro
 2. Corresponding LEDs to indicate the currently active device
+3. OSD
+4. API / plugins to use extra knobs and buttons for other purposes
 
 ## Developing
 The hardware side uses an Arduino sketch to communicate the hardware state over the serial port.

Windows/Forms/SettingsForm.Designer.cs

@@ -185,7 +185,6 @@ namespace MassiveKnob.Forms
             this.StartPosition = System.Windows.Forms.FormStartPosition.CenterScreen;
             this.Text = "Massive Knob - Settings";
             this.FormClosing += new System.Windows.Forms.FormClosingEventHandler(this.SettingsForm_FormClosing);
-            this.FormClosed += new System.Windows.Forms.FormClosedEventHandler(this.SettingsForm_FormClosed);
             this.NotifyIconMenu.ResumeLayout(false);
             this.CommunicationGroupbox.ResumeLayout(false);
             this.CommunicationGroupbox.PerformLayout();

Windows/Forms/SettingsForm.cs

@@ -4,6 +4,8 @@ using System.IO.Ports;
 using System.Linq;
 using System.Threading.Tasks;
 using System.Windows.Forms;
+using Dapplo.Windows.Devices;
+using Dapplo.Windows.Devices.Enums;
 using MassiveKnob.Hardware;
 using MassiveKnob.Settings;
 using MassiveKnob.UserControls;
@@ -11,13 +13,15 @@ using Nito.AsyncEx;
 
 namespace MassiveKnob.Forms
 {
-    public partial class SettingsForm : Form, IMassiveKnobHardwareObserver
+    public partial class SettingsForm : Form, IMassiveKnobHardwareObserver, IObserver<DeviceNotificationEvent>
     {
         private readonly IAudioDeviceManager audioDeviceManager;
         private readonly IMassiveKnobHardwareFactory massiveKnobHardwareFactory;
         private readonly List<KnobDeviceControl> knobDeviceControls = new List<KnobDeviceControl>();
 
         private bool loading = true;
+        private string lastConnectedPort = null;
+        private IDisposable deviceSubscription;
         private IMassiveKnobHardware hardware;
         private IAudioDevice[] devices;
         private Settings.Settings settings;
@@ -35,29 +39,30 @@ namespace MassiveKnob.Forms
             this.massiveKnobHardwareFactory = massiveKnobHardwareFactory;
             
             InitializeComponent();
-
             SerialPortStatusLabel.Text = Strings.StatusNotConnected;
 
-            Task.Run(async () =>
+            // Due to the form not being visible initially (see SetVisibleCore), we can't use the Load event
-            {
+            AsyncLoad();
-                await LoadSettings();
-
-                await Task.WhenAll(
-                    LoadSerialPorts(),
-                    LoadAudioDevices()
-                );
-
-                loading = false;
-                await Connect();
-            }).ContinueWith(t =>
-            {
-                if (t.IsFaulted && t.Exception != null)
-                    SafeCall(() => throw t.Exception);
-            });
         }
         
 
-        private void SafeCall(Action action)
+        private async void AsyncLoad()
+        {
+            await LoadSettings();
+
+            await Task.WhenAll(
+                LoadSerialPorts(),
+                LoadAudioDevices()
+            );
+
+            deviceSubscription = DeviceNotification.OnNotification.Subscribe(this);
+
+            loading = false;
+            await Connect();
+        }
+
+
+        private void RunInUIContext(Action action)
         {
             if (InvokeRequired)
                 Invoke(action);
@@ -70,7 +75,7 @@ namespace MassiveKnob.Forms
         {
             var portNames = SerialPort.GetPortNames();
             
-            SafeCall(() =>
+            RunInUIContext(() =>
             {
                 SerialPortCombobox.BeginUpdate();
                 try
@@ -97,22 +102,19 @@ namespace MassiveKnob.Forms
         private async Task LoadSettings()
         {
             var newSettings = await SettingsJsonSerializer.Deserialize();
-            SafeCall(() => SetSettings(newSettings));
+            RunInUIContext(() => SetSettings(newSettings));
         }
 
 
-        private void SaveSettings()
+        private async Task SaveSettings()
         {
             if (settings == null)
                 return;
 
-            Task.Run(async () =>
+            using (await saveSettingsLock.LockAsync())
             { 
-                using (await saveSettingsLock.LockAsync())
+                await SettingsJsonSerializer.Serialize(settings);
-                { 
+            }
-                    await SettingsJsonSerializer.Serialize(settings);
-                }
-            });
         }
 
 
@@ -120,9 +122,8 @@ namespace MassiveKnob.Forms
         {
             string serialPort = null;
             
-            SafeCall(() =>
+            RunInUIContext(() =>
             {
-                SerialPortStatusLabel.Text = Strings.StatusConnecting;
                 serialPort = (string)SerialPortCombobox.SelectedItem;
             });
 
@@ -145,7 +146,7 @@ namespace MassiveKnob.Forms
         private async Task LoadAudioDevices()
         {
             var newDevices = await audioDeviceManager.GetDevices();
-            SafeCall(() => SetDevices(newDevices));
+            RunInUIContext(() => SetDevices(newDevices));
         }
 
 
@@ -158,10 +159,12 @@ namespace MassiveKnob.Forms
             SerialPortCombobox.SelectedItem = value.SerialPort;
             
             // No need to update the knob device user controls, as they are not loaded yet
+            // (guaranteed by the order in AsyncLoad)
 
             settings = value;
         }
 
+        
         private void SetDevices(IEnumerable<IAudioDevice> value)
         {
             devices = value.ToArray();
@@ -206,13 +209,13 @@ namespace MassiveKnob.Forms
                     if (i < settings.Knobs.Count)
                         knobDeviceControl.SetDeviceId(settings.Knobs[i].DeviceId);
 
-                    knobDeviceControl.OnDeviceChanged += (sender, args) =>
+                    knobDeviceControl.OnDeviceChanged += async (sender, args) =>
                     {
                         while (settings.Knobs.Count - 1 < args.KnobIndex)
                             settings.Knobs.Add(new Settings.Settings.KnobSettings());
 
                         settings.Knobs[args.KnobIndex].DeviceId = args.DeviceId;
-                        SaveSettings();
+                        await SaveSettings();
                     };
 
                     knobDeviceControls.Add(knobDeviceControl);
@@ -241,7 +244,13 @@ namespace MassiveKnob.Forms
         {
             // Prevent the form from showing at startup
             if (!startupVisibleCalled)
+            {
                 startupVisibleCalled = true;
+
+                // Make sure the underlying window is still created, otherwise Close won't work
+                if (!IsHandleCreated)
+                    CreateHandle();
+            }
             else
                 base.SetVisibleCore(value);
         }
@@ -253,16 +262,43 @@ namespace MassiveKnob.Forms
         }
         
         
-        private void Quit()
+        private async Task Quit()
         {
+            Hide();
+            
+            deviceSubscription?.Dispose();
+            
+            foreach (var knobDeviceControl in knobDeviceControls)
+                knobDeviceControl.Dispose();
+
+            knobDeviceControls.Clear();
+
+
+            if (hardware != null)
+            {
+                hardware.DetachObserver(this);
+                await hardware.Disconnect();
+            }
+
+            audioDeviceManager?.Dispose();
+
             closing = true;
             Close();
         }
 
 
+        public void Connecting()
+        {
+            RunInUIContext(() =>
+            {
+                SerialPortStatusLabel.Text = Strings.StatusConnecting;
+            });
+        }
+        
+
         public void Connected(int knobCount)
         {
-            SafeCall(() =>
+            RunInUIContext(() =>
             {
                 SerialPortStatusLabel.Text = Strings.StatusConnected;
                 SetKnobCount(knobCount);
@@ -272,14 +308,15 @@ namespace MassiveKnob.Forms
 
         public void Disconnected()
         {
-            SafeCall(() =>
+            RunInUIContext(() =>
             {
                 SerialPortStatusLabel.Text = Strings.StatusNotConnected;
+                lastConnectedPort = null;
             });
         }
 
 
-        public void VolumeChanged(int knob, int volume)
+        public async void VolumeChanged(int knob, int volume)
         {
             if (knob >= settings.Knobs.Count)
                 return;
@@ -289,15 +326,12 @@ namespace MassiveKnob.Forms
 
             var deviceId = settings.Knobs[knob].DeviceId.Value;
 
-            Task.Run(async () =>
+            using (await setVolumeLock.LockAsync())
             {
-                using (await setVolumeLock.LockAsync())
+                var device = await audioDeviceManager.GetDeviceById(deviceId);
-                {
+                if (device != null)
-                    var device = await audioDeviceManager.GetDeviceById(deviceId);
+                    await device.SetVolume(volume);
-                    if (device != null)
+            }
-                        await device.SetVolume(volume);
-                }
-            });
         }
 
 
@@ -311,29 +345,15 @@ namespace MassiveKnob.Forms
         }
 
         
-        private void SettingsForm_FormClosed(object sender, FormClosedEventArgs e)
-        {
-            foreach (var knobDeviceControl in knobDeviceControls)
-                knobDeviceControl.Dispose();
-
-            knobDeviceControls.Clear();
-            
-
-            hardware?.DetachObserver(this);
-            hardware?.Disconnect().GetAwaiter().GetResult();
-            audioDeviceManager?.Dispose();
-        }        
-        
-        
         private void NotifyIcon_DoubleClick(object sender, EventArgs e)
         {
             Settings();
         }
 
         
-        private void QuitToolStripMenuItem_Click(object sender, EventArgs e)
+        private async void QuitToolStripMenuItem_Click(object sender, EventArgs e)
         {
-            Quit();
+            await Quit();
         }
 
         
@@ -349,15 +369,39 @@ namespace MassiveKnob.Forms
         }
 
         
-        private void SerialPortCombobox_SelectedIndexChanged(object sender, EventArgs e)
+        private async void SerialPortCombobox_SelectedIndexChanged(object sender, EventArgs e)
         {
-            if (loading || (string)SerialPortCombobox.SelectedItem == settings.SerialPort)
+            var newPort = (string) SerialPortCombobox.SelectedItem;
+            if (loading || newPort == lastConnectedPort)
                 return;
 
-            settings.SerialPort = (string) SerialPortCombobox.SelectedItem;
+            lastConnectedPort = newPort;
-            SaveSettings();
+            if (settings.SerialPort != newPort)
+            {
+                settings.SerialPort = (string) SerialPortCombobox.SelectedItem;
+                await SaveSettings();
+            }
 
-            Task.Run(Connect);
+            await Connect();
+        }
+
+        
+        public async void OnNext(DeviceNotificationEvent value)
+        {
+            if ((value.EventType == DeviceChangeEvent.DeviceArrival ||
+                 value.EventType == DeviceChangeEvent.DeviceRemoveComplete) &&
+                value.Is(DeviceBroadcastDeviceType.DeviceInterface))
+            {
+                await LoadSerialPorts();
+            }
+        }
+
+        public void OnError(Exception error)
+        {
+        }
+
+        public void OnCompleted()
+        {
         }
     }
 }

Windows/Hardware/AbstractMassiveKnobHardware.cs

@@ -38,6 +38,13 @@ namespace MassiveKnob.Hardware
             }
 
 
+            public void Connecting()
+            {
+                foreach (var observer in observers)
+                    observer.Connecting();
+            }
+
+            
             public void Connected(int knobCount)
             {
                 foreach (var observer in observers)

Windows/Hardware/IMassiveKnobHardware.cs

@@ -4,6 +4,7 @@ namespace MassiveKnob.Hardware
 {
     public interface IMassiveKnobHardwareObserver
     {
+        void Connecting();
         void Connected(int knobCount);
         void Disconnected();
 
@@ -25,6 +26,6 @@ namespace MassiveKnob.Hardware
 
     public interface IMassiveKnobHardwareFactory
     {
-        IMassiveKnobHardware Create(string serialPort);
+        IMassiveKnobHardware Create(string portName);
     }
 }

Windows/Hardware/MockMassiveKnobHardware.cs

@@ -48,6 +48,7 @@ namespace MassiveKnob.Hardware
     }
     
     
+    // ReSharper disable once UnusedMember.Global - for testing purposes only
     public class MockMassiveKnobHardwareFactory : IMassiveKnobHardwareFactory
     {
         private readonly int knobCount;
@@ -62,7 +63,7 @@ namespace MassiveKnob.Hardware
         }
         
         
-        public IMassiveKnobHardware Create(string serialPort)
+        public IMassiveKnobHardware Create(string portName)
         {
             return new MockMassiveKnobHardware(knobCount, volumeChangeInterval, maxVolume);
         }

Windows/Hardware/SerialMassiveKnobHardware.cs

@@ -0,0 +1,180 @@
+using System.Diagnostics;
+using System.IO.Ports;
+using System.Threading;
+using System.Threading.Tasks;
+
+namespace MassiveKnob.Hardware
+{
+    public class SerialMassiveKnobHardware : AbstractMassiveKnobHardware
+    {
+        private readonly string portName;
+        private Thread workerThread;
+        
+        private readonly CancellationTokenSource workerThreadCancellation = new CancellationTokenSource();
+        private readonly TaskCompletionSource<bool> workerThreadCompleted = new TaskCompletionSource<bool>();
+             
+
+        public SerialMassiveKnobHardware(string portName)
+        {
+            this.portName = portName;
+        }
+
+
+        public override async Task TryConnect()
+        {
+            if (workerThread != null)
+                await Disconnect();
+
+            workerThread = new Thread(RunWorker)
+            {
+                Name = "SerialMassiveKnobHardware Worker"
+            };
+            workerThread.Start();
+        }
+
+        
+        public override async Task Disconnect()
+        {
+            workerThreadCancellation.Cancel();
+            await workerThreadCompleted.Task;
+
+            workerThread = null;
+        }
+
+
+        private void RunWorker()
+        {
+            Observers.Connecting();
+            
+            while (!workerThreadCancellation.IsCancellationRequested)
+            {
+                SerialPort serialPort = null;
+
+                void SafeCloseSerialPort()
+                {
+                    try
+                    {
+                        serialPort?.Dispose();
+                    }
+                    catch
+                    {
+                        // ignroed
+                    }
+
+                    serialPort = null;
+                    Observers.Disconnected();
+                    Observers.Connecting();
+                }
+                
+                
+                var knobCount = 0;
+
+                while (serialPort == null && !workerThreadCancellation.IsCancellationRequested)
+                {
+                    try
+                    {
+                        serialPort = new SerialPort(portName, 115200);
+                        serialPort.Open();
+
+                        // Send handshake
+                        serialPort.Write(new[] { 'H', 'M', 'K', 'B' }, 0, 4);
+
+                        // Wait for reply
+                        serialPort.ReadTimeout = 1000;
+                        var response = serialPort.ReadByte();
+
+                        if ((char) response == 'H')
+                        {
+                            knobCount = serialPort.ReadByte();
+                            if (knobCount > -1)
+                                break;
+                        }
+
+                        SafeCloseSerialPort();
+                        Thread.Sleep(500);
+                    }
+                    catch
+                    {
+                        SafeCloseSerialPort();
+                        Thread.Sleep(500);
+                    }
+                }
+
+                if (workerThreadCancellation.IsCancellationRequested)
+                {
+                    SafeCloseSerialPort();
+                    break;
+                }
+
+                var processingMessage = false;
+
+                Debug.Assert(serialPort != null, nameof(serialPort) + " != null");
+                serialPort.DataReceived += (sender, args) =>
+                {
+                    if (args.EventType != SerialData.Chars || processingMessage)
+                        return;
+
+                    var senderPort = (SerialPort) sender;
+                    processingMessage = true;
+                    try
+                    {
+                        var message = (char) senderPort.ReadByte();
+                        ProcessMessage(senderPort, message);
+                    }
+                    finally
+                    {
+                        processingMessage = false;
+                    }
+                };
+
+
+                Observers.Connected(knobCount);
+                try
+                {
+                    // This is where sending data to the hardware would be implemented
+                    while (serialPort.IsOpen && !workerThreadCancellation.IsCancellationRequested)
+                    {
+                        Thread.Sleep(10);
+                    }
+                }
+                catch
+                {
+                    // ignored
+                }
+
+                Observers.Disconnected();
+                SafeCloseSerialPort();
+                
+                if (!workerThreadCancellation.IsCancellationRequested)
+                    Thread.Sleep(500);
+            }
+
+            workerThreadCompleted.TrySetResult(true);
+        }
+        
+        
+        private void ProcessMessage(SerialPort serialPort, char message)
+        {
+            switch (message)
+            {
+                case 'V':
+                    var knobIndex = (byte)serialPort.ReadByte();
+                    var volume = (byte)serialPort.ReadByte();
+                    
+                    if (knobIndex < 255 && volume <= 100)
+                        Observers.VolumeChanged(knobIndex, volume);
+                    
+                    break;
+            }
+        }
+    }
+
+
+    public class SerialMassiveKnobHardwareFactory : IMassiveKnobHardwareFactory
+    {
+        public IMassiveKnobHardware Create(string portName)
+        {
+            return new SerialMassiveKnobHardware(portName);
+        }
+    }
+}

Windows/MassiveKnob.csproj

@@ -65,6 +65,7 @@
     <Compile Include="Hardware\IAudioDeviceManager.cs" />
     <Compile Include="Hardware\IMassiveKnobHardware.cs" />
     <Compile Include="Hardware\MockMassiveKnobHardware.cs" />
+    <Compile Include="Hardware\SerialMassiveKnobHardware.cs" />
     <Compile Include="Program.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
     <Compile Include="Settings\Settings.cs" />
@@ -116,6 +117,12 @@
     <PackageReference Include="AudioSwitcher.AudioApi.CoreAudio">
       <Version>4.0.0-alpha5</Version>
     </PackageReference>
+    <PackageReference Include="Dapplo.Windows.Devices">
+      <Version>0.11.24</Version>
+    </PackageReference>
+    <PackageReference Include="Dapplo.Windows.Messages">
+      <Version>0.11.24</Version>
+    </PackageReference>
     <PackageReference Include="Newtonsoft.Json">
       <Version>12.0.3</Version>
     </PackageReference>

Windows/MassiveKnob.sln.DotSettings

@@ -0,0 +1,2 @@
+<wpf:ResourceDictionary xml:space="preserve" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:s="clr-namespace:System;assembly=mscorlib" xmlns:ss="urn:shemas-jetbrains-com:settings-storage-xaml" xmlns:wpf="http://schemas.microsoft.com/winfx/2006/xaml/presentation">
+	<s:String x:Key="/Default/CodeStyle/Naming/CSharpNaming/Abbreviations/=UI/@EntryIndexedValue">UI</s:String></wpf:ResourceDictionary>

Windows/Program.cs

@@ -35,7 +35,8 @@ namespace MassiveKnob
             container.Register<IAudioDeviceManagerFactory, CoreAudioDeviceManagerFactory>();
             
             // For testing without the hardware:
-            container.Register<IMassiveKnobHardwareFactory>(() => new MockMassiveKnobHardwareFactory(3, TimeSpan.FromSeconds(1), 25));
+            container.Register<IMassiveKnobHardwareFactory, SerialMassiveKnobHardwareFactory>();
+            //container.Register<IMassiveKnobHardwareFactory>(() => new MockMassiveKnobHardwareFactory(3, TimeSpan.FromSeconds(1), 25));
             
             return container;
         }