Web/wiki
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Updated etching (markdown)

Browse Source
This commit is contained in:
Mark van Renswoude 2018-11-25 13:43:08 +01:00
parent a4c0832297
commit 0510834877
1 changed files with 13 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
electronics/electronics/pcbfabrication/etching.md
View File

@ -3,3 +3,16 @@
[[Home|/home]] ► [[Electronics|/electronics]] ► [[Circuit board fabrication|/electronics/pcbfabrication]] ► Etching the board [[Home|/home]] ► [[Electronics|/electronics]] ► [[Circuit board fabrication|/electronics/pcbfabrication]] ► Etching the board
___ ___
**Prerequisites**
* [Copper board with photoresist applied](/electronics/pcbfabrication/applyphotoresist)
* [Ferric chloride](/electronics/bom#chemicals_ferric-chloride)
* Sponge or brush
* Gloves
## Etching
I prefer to pour a small amount of ferric chloride in a plastic container and rub it on the board with a small piece of sponge or a brush. This usually takes 10 minutes depending on if the ferric chloride has already been used and the temperature, but allows you to monitor the process closely and focus on the unetched parts. In contrast to dipping the board in a bigger tank, this tends to etch from the inside out.
If you're going to do more than the occasional board, look up better methods.