Updated bom (markdown)
This commit is contained in:
parent
747baa1259
commit
1807a082f3
@ -22,7 +22,7 @@ Use transparencies designed for your printer type. The ones I use are Esselte 57
|
||||
http://www.123inkt.nl/Esselte-57161-transparanten-voor-inkjet-printers-50-bladen-57161-i22534-t33400.html
|
||||
|
||||
### Circuit board
|
||||
I don't use boards with a presensitized photoresist layer, so any plain single or double sided board will do. Don't get the cheap cardboard ones though.
|
||||
I don't use boards with a presensitized photoresist layer, so any plain single or double sided board will do. Don't get the cheap cardboard ones though. Be aware that the process is different with the presensitized boards (positive vs negative exposure, different chemicals), so don't follow my guide if you want to etch those.
|
||||
|
||||
Adding the film yourself is a bit of extra work, but allows you to retry if the exposure fails. Replacing the film is a lot cheaper than wasting copper.
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user