Implemented screen timeout and button detection

This commit is contained in:
Mark van Renswoude 2020-01-30 16:01:26 +01:00
parent b1600ab1d6
commit df61b1f24d
8 changed files with 88 additions and 74 deletions

View File

@ -1,47 +0,0 @@
# Error codes reference
During startup a number of error codes may be presented. This document serves as a reference for tracing the problem.
### height sensor
Errors are logged as "code @ position". Code is the status code as returned by the VL53L0X API, and position determines which API call during initialization failed. Test
| Code | Constant | Description |
|--|--|--|
| -1 | VL53L0X_ERROR_CALIBRATION_WARNING | Warning invalid calibration data may be in used VL53L0X_InitData(), VL53L0X_GetOffsetCalibrationData, VL53L0X_SetOffsetCalibrationData |
| -2 | VL53L0X_ERROR_MIN_CLIPPED | Warning parameter passed was clipped to min before to be applied |
| -3 | VL53L0X_ERROR_UNDEFINED | Unqualified error |
| -4 | VL53L0X_ERROR_INVALID_PARAMS | Parameter passed is invalid or out of range |
| -5 | VL53L0X_ERROR_NOT_SUPPORTED | Function is not supported in current mode or configuration |
| -6 | VL53L0X_ERROR_RANGE_ERROR | Device report a ranging error interrupt status |
| -7 | VL53L0X_ERROR_TIME_OUT | Aborted due to time out |
| -8 | VL53L0X_ERROR_MODE_NOT_SUPPORTED | Asked mode is not supported by the device |
| -9 | VL53L0X_ERROR_BUFFER_TOO_SMALL | ... |
| -10 | VL53L0X_ERROR_GPIO_NOT_EXISTING | User tried to setup a non-existing GPIO pin |
| -11 | VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED | unsupported GPIO functionality |
| -12 | VL53L0X_ERROR_INTERRUPT_NOT_CLEARED | Error during interrupt clear |
| -20 | VL53L0X_ERROR_CONTROL_INTERFACE | error reported from IO functions |
| -30 | VL53L0X_ERROR_INVALID_COMMAND | The command is not allowed in the current device state (power down) |
| -40 | VL53L0X_ERROR_DIVISION_BY_ZERO | In the function a division by zero occurs |
| -50 | VL53L0X_ERROR_REF_SPAD_INIT | Error during reference SPAD initialization |
| -99 | VL53L0X_ERROR_NOT_IMPLEMENTED |
<br>
| Position | Description |
|--|--|
| 1 | VL53L0X_DataInit |
| 2 | VL53L0X_SetDeviceAddress |
| 3 | VL53L0X_GetDeviceInfo |
| 4 | VL53L0X_StaticInit |
| 5 | VL53L0X_PerformRefSpadManagement |
| 6 | VL53L0X_PerformRefCalibration |
| 7 | VL53L0X_SetDeviceMode |
| 8 | VL53L0X_SetLimitCheckEnable(VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE) |
| 9 | VL53L0X_SetLimitCheckEnable(VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE) |
| 10 | VL53L0X_SetLimitCheckEnable(VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD) |
| 11 | VL53L0X_SetLimitCheckValue(VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD) |
### timing budget
Errors are logged as an VL53L0X API code. See the table above for reference.

View File

@ -17,13 +17,11 @@ lib_deps =
Bounce2
Adafruit GFX Library
Adafruit ST7735 and ST7789 Library
Adafruit_VL53L0X
[env:uno]
platform = atmelavr
board = atmega328p
board_build.f_cpu = 16000000L
board = uno
framework = arduino
upload_port = COM3

View File

@ -27,6 +27,16 @@
class Config
{
public:
/*
Buttons
*/
static const uint8_t ButtonPortUp = 3;
static const uint8_t ButtonPortMenu = 5;
static const uint8_t ButtonPortDown = 6;
/*
Display
@ -47,6 +57,9 @@ class Config
static const uint8_t DisplayPortBL = 7;
static const uint16_t DisplayIdleTime = 10000;
/*
Height sensor
Settings for a VL53L0X time-of-flight sensor.

View File

@ -1,7 +1,29 @@
#include "./screen.h"
#include "include/config.h"
Adafruit_GFX* BaseScreen::getDisplay()
{
return this->screenManager->getDisplay();
}
void ScreenManager::init()
{
pinMode(Config::DisplayPortBL, OUTPUT);
digitalWrite(Config::DisplayPortBL, HIGH);
}
void ScreenManager::displayOff()
{
digitalWrite(Config::DisplayPortBL, LOW);
this->display->sendCommand(ST77XX_SLPIN);
}
void ScreenManager::displayOn()
{
this->display->sendCommand(ST77XX_SLPOUT);
digitalWrite(Config::DisplayPortBL, HIGH);
}

View File

@ -1,7 +1,7 @@
#ifndef __screen
#define __screen
#include <Adafruit_GFX.h>
#include <Adafruit_ST7789.h>
#include "include/config.h"
@ -43,11 +43,14 @@ class BaseScreen
class ScreenManager
{
public:
ScreenManager(Adafruit_GFX* display)
ScreenManager(Adafruit_ST7789* display)
{
this->display = display;
}
void init();
inline void button(Button button) { this->getCurrentScreen()->onButton(button); }
inline void tick() { this->getCurrentScreen()->onTick(); }
inline BaseScreen* getCurrentScreen() { return this->currentScreen; }
@ -66,8 +69,12 @@ class ScreenManager
this->currentScreen->onShow();
}
void displayOff();
void displayOn();
private:
Adafruit_GFX* display;
Adafruit_ST7789* display;
BaseScreen* currentScreen = nullptr;
};

View File

@ -38,6 +38,16 @@ void HomeScreen::onShow()
void HomeScreen::onButton(Button button)
{
if (this->idle)
{
this->getScreenManager()->displayOn();
this->idle = false;
this->showTime = State.CurrentTime;
// TODO should preset buttons activate immediately?
return;
}
switch (button)
{
case Button::Up:
@ -59,8 +69,11 @@ void HomeScreen::onButton(Button button)
void HomeScreen::onTick()
{
// TODO turn off screen after timeout
//if (State.CurrentTime )
if (!this->idle && State.CurrentTime - this->showTime >= Config::DisplayIdleTime)
{
this->getScreenManager()->displayOff();
this->idle = true;
}
}

View File

@ -19,7 +19,8 @@ class HomeScreen : public BaseScreen
void onTick();
private:
uint32_t showTime;
uint32_t showTime = 0;
bool idle = false;
void drawPreset1();
void drawPreset2();

View File

@ -2,6 +2,7 @@
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_ST7789.h>
#include <Bounce2.h>
#include "./include/config.h"
#include "./lib/debug.h"
@ -42,6 +43,8 @@ auto heightSensor = VL53L0X();
auto screenManager = ScreenManager(&display);
Bounce buttons[3];
/*
@ -50,15 +53,17 @@ auto screenManager = ScreenManager(&display);
*/
void setup()
{
State.CurrentTime = millis();
DebugInit();
pinMode(Config::DisplayPortBL, OUTPUT);
digitalWrite(Config::DisplayPortBL, HIGH);
buttons[0].attach(Config::ButtonPortUp, INPUT_PULLUP);
buttons[1].attach(Config::ButtonPortMenu, INPUT_PULLUP);
buttons[2].attach(Config::ButtonPortDown, INPUT_PULLUP);
display.init(Config::DisplayWidth, Config::DisplayHeight, SPI_MODE3);
display.setRotation(Config::DisplayRotation);
screenManager.init();
initSequenceStart();
// Load settings from EEPROM
@ -73,6 +78,8 @@ void setup()
initSequenceEnd();
State.CurrentTime = millis();
if (initialized)
{
State.CurrentHeight = currentHeight;
@ -190,6 +197,20 @@ void loop()
updateHeight();
}
buttons[0].update();
buttons[1].update();
buttons[2].update();
if (buttons[0].rose())
screenManager.button(Button::Up);
if (buttons[1].rose())
screenManager.button(Button::Menu);
if (buttons[2].rose())
screenManager.button(Button::Down);
screenManager.tick();
}
@ -225,20 +246,6 @@ bool heightSensorGetRange(uint16_t* measurement)
}
/*
For display sleep:
delay(1000);
display.sendCommand(ST77XX_SLPIN);
// toggle backlight pin
For motor sleep toggle slp pin
*/
/*